DamoMonster.com Follow me on FaceBook!Follow me on Twitter!Subscribe to me on YouTube!

 

.. These pages are a suppliment to my YouTube videos, which can be viewed on my YouTube Channel Page ..

 


Universal Super Nintendo

 

This is the circuit diagram needed for constructing your Mod Chip for a Universal SNES

 
Parts Needed:
  • 2x 220Ohm Resistors
  • 1x 10K Resistor
  • 1x Vero Board
  • Wire (0.2mm or smaller)
  • 1x 5mm Red/Green LED
  • PIC 16f630
  • PIC Programmer
  • Hex Code
 
 
 
Universal Super Nintendo
 

 

Super Nintendo Region Mod

 
Parts Needed:
  • 2x Single Pole Double Throw Switches
  • 1x 2.2K Ohm Resistor
  • Wire (0.2mm or smaller)
 
 
Part 1 of performing a Region and 50/60Hz mod using conventional switches.
 
 
Part 2 of performing a Region and 50/60Hz mod using conventional switches.
 

 

Super Nintendo LED Replacement

 
 
A quick video on replacing the LED in a PAL Super Nintendo or a Super Famicom.
 

 

Super Nintendo Mini LED Mod

 
Parts Needed:
  • 1x 220 Ohm Resistor
  • 1x LED
 
 
This video covers adding a much needed Power LED to the Super Nintendo 2/Jnr./Mini